Curriculum vitae

MASc, Mechanical Engineering

GPA 3.95 / 4.33 · Supervisor Dr. Steven Rogak · Sustainable aviation propulsion, gas-turbine emissions, experimental thermofluids

BASc, Mechanical Engineering

Advanced Mechanical Engineering Technologist Diploma

Mechanical Engineering Technologist Diploma

Honors Society (2021/2022) · Jason Lang Scholarship

Graduate Research Assistant

• Gaseous emissions and CRN validation. JetCat P200-SX thermodynamic and emissions data for an RQL reactor network; outlet temperature, CO₂ and CO within 4.5%, NOₓ overpredicted about 1.8× (Jet A-1). Turbo Expo 2026; accepted in JEGTP.
• Particle instrumentation. Integrated an SMPS and catalytic stripper, then a nano-DMA/CPC chain for Jet A-1 and FT-SPK; size-dependent line and stripper-loss corrections for GPPS, CICS and ETH outputs.
• Engine-scale comparison. Max-load combustor-inlet state within ≈16 K and 24 kPa of the V2500 at idle (selected comparison point); nvPM geometric mean diameter of 8.6 nm at max load. March 2026 campaign: FT-SPK used 8.5%, 6.5%, 5.0% more fuel by volume at 80, 90, 100% corrected speed, with ≈1.5% lower mass-specific consumption at max load.
• P220-RXi and program coordination. Leading instrumentation of a new JetCat P220-RXi; coordinating UBC work for JET-CALF, SCALE-SAF and VLAME with TU Braunschweig, Tampere, Sunchon National University, NRC and Boeing.

Undergraduate Research Assistant

• Commissioned the original instrumented P200-SX facility: telemetry, thermodynamic and performance measurement, initial exhaust system.
• Integrated an ECOM J2KN Pro plus 2B Technologies NOₓ, Teledyne API T300U CO and LI-COR LI-850 CO₂ analysers; coordinated Jet A-1 and FT-SPK procurement through TU Braunschweig.
• Verified ventilation and CO-alarm response, designed the initial exhaust ducting, wrote the first engine-test SOP.

Thermodynamic cycle analysis of a low-bypass afterburning turbofan

Station-by-station MATLAB solver for the F100-PW-100; dry and afterburning thrust, SFC and fuel flow within 8% of published data; parametric sweeps of TIT, pressure ratio and component efficiency.

ASHRAE 2025 Student Design Competition

Load calculations, heat-transfer and PMV comfort analysis, annual energy mapping and equipment selection; ASHRAE Rising Star Award, presented at the 2026 ASHRAE Winter Conference.

ILS & LSA Systems Engineering Intern

• Coordinated Initial Provisioning Conferences with the Royal Canadian Navy, vendors and stakeholders; reviewed 6,000+ technical records.
• Directed interns on Engineering Review Notices, data management and vendor follow-up.
• Led PSAR development for the AFFF system aboard the Joint Support Ship using MBSE tools; authored the JSS Storage Plan Requirements under MIL-STD-1388-2B.

Graduate research mentorship & facility coordination

Supporting MASc student Tully Underhill on modified-CPC measurements of fuel-dependent CCN potential, and mentoring BASc student Ethan Xiong on facility upgrades, exhaust concepts and CAD. Responsible for engine operation, sampling integration, test-matrix design, calibration and campaign coordination.

Teaching Assistant, MECH 360 Solid Mechanics

Weekly tutorials, practice material, assessment and course support.

Java Coding Instructor